Avid Peloton users or just getting started with their high-intensity workout programs, having a good pair of wireless headphones can significantly enhance your exercise experience.
Apple’s popular AirPods provide a convenient and cord-free audio solution that pairs perfectly with the Peloton ecosystem. How to connect AirPods to peloton bike or treadmill allows you to fully immerse yourself in the class, hearing your instructor’s motivating cues and pumping music without any distracting wires getting in the way.
With just a few simple steps, you can easily sync your AirPods to your Peloton device and enjoy a more engaging, distraction-free workout from start to finish. In this guide, we’ll walk through the straightforward process for connecting AirPods to your Peloton bike or treadmill so you can focus solely on crushing your fitness goals.
Make sure that AirPods are not connected to any device
The first step is to disconnect your AirPods from any devices they were previously paired with. On your iPhone, iPad, Mac, or other device, go to the Bluetooth settings and find your AirPods listed under connected devices.
Tap the i info button next to your AirPod, then select Disconnect or Forget This Device to break the Bluetooth connection. Repeat this process for any other devices your AirPod were paired with. This ensures your AirPod are no longer actively connected to any other devices.
Once disconnected, place your AirPods back in their charging case and close the lid for 15-30 seconds to reset the connection. Then open the lid again – your AirPod should no longer show as connected devices in any Bluetooth menus. This puts your AirPod in an unconnected state, ready to pair with a new device like your Peloton.
Put the AirPods in the AirPods case
To put your AirPod in the AirPod case, follow these simple steps:
- Pick up the AirPods case and flip open the lid to expose the two charging slots inside.
- Remove the AirPod from your ears if they are currently in use.
- Take the left AirPod and place it gently into the left charging slot within the case. The AirPod should fit snugly and make contact with the charging connectors.
- Repeat with the right AirPod, placing it carefully into the right charging slot.
- Once both AirPod are sitting correctly in their respective slots, you can close the lid of the AirPods case.
- You’ll know the AirPod are seated correctly if the case’s internal LED light blinks for a few seconds when you close the lid.
That’s it! With both AirPod securely inside the closed charging case, they are now safely stored and can charge their batteries if needed.
Make Airpods ready for pairing
To get your AirPods ready to pair with your device, you first need to put them in pairing mode. This is very easy to do. Just open up the charging case with your AirPod inside. There is a small button on the back of the case. Press and hold that button until you see a white flashing light on the front of the case.
Once the light is flashing white, you can go to the Bluetooth settings on your phone, tablet, or computer and look for AirPod in the list of available devices. SelectAirPod and follow the prompts to connect them. After a short time, your AirPod will be paired and ready to use for listening to music, podcasts, videos, and more.
Turn on the Bluetooth of the peloton
To turn on Bluetooth on your Peloton, first make sure the Peloton is powered on. Then look for the Settings icon on the Peloton touchscreen – it looks like a gear or cog. Tap the Settings icon to open the settings menu. In the menu, find the option for Bluetooth and tap it to turn Bluetooth on.
Once Bluetooth is turned on, the Peloton screen will show any available Bluetooth devices nearby that you can connect to. This allows you to pair Bluetooth headphones, heart rate monitors, or other fitness accessories with your Peloton bike or treadmill.
Pair the device with Peloton
To pair a device like headphones or a heart rate monitor with your Peloton, you first need to make sure Bluetooth is turned on. Look for the Bluetooth settings on the Peloton touchscreen and tap to turn Bluetooth on if it’s not enabled already.
Once Bluetooth is on, the Peloton screen will show you a list of available devices nearby that you can pair with. Put your device in pairing mode so it shows up on the list. Then, tap the name of your device on the Peloton screen. It will pair and connect the two devices wirelessly over Bluetooth.
Test the AirPods with the peloton
To test your AirPods with the Peloton, you’ll first need to pair them. Turn on Bluetooth on the Peloton screen, then open the AirPod case and hold the setup button until the light flashes white. This puts the AirPod in pairing mode. On the Peloton screen, tap the AirPod name when it appears in the list of available devices.
Once your AirPod are paired and connected to the Peloton, you can test them out. Put the AirPods in your ears and start a Peloton workout class on the screen. The audio from the class, including the instructor’s voice and music, should play through your AirPod.
You might want to check: How Long Does It Take to Walk 2 Kilometers? (Comprehensive Guide)
Apple AirPods are not connecting to Peloton
Bluetooth is enabled on your Peloton. Go to the Settings menu and tap Bluetooth to turn it on. Then try re-pairing your AirPod. Open the AirPod case lid and press and hold the setup button on the back until the status light starts blinking white. On the Peloton screen, look for AirPods in the list of available devices and tap to connect.
If you still can’t get the AirPods to connect, try restarting both devices. Close the AirPods case to power them off completely. Then, power off the Peloton touchscreen and unplug it from power for 30 seconds before plugging it back in. Once restarted, enable Bluetooth again and retry the pairing process with your AirPod in discovery mode.
Frequently Asked Questions
How do I put my AirPods in pairing mode?
To put your AirPod in pairing mode, open the charging case lid with your AirPod inside. Then press and hold the small setup button on the back of the case until the status light starts blinking white.
Where do I find Bluetooth settings on the Peloton?
On your Peloton touchscreen, tap the Settings icon (it looks like a gear). Then, look for the Bluetooth option in the settings menu and tap it to turn Bluetooth on.
How do I connect my AirPods to the Peloton?
Once Bluetooth is on and your AirPod are in pairing mode, you should see AirPod in the list of available devices on the Peloton screen. Tap AirPods to connect them.
Why won’t my AirPods connect to the Peloton?
If your AirPods don’t connect, try restarting both devices. Close the AirPod case, power off the Peloton screen, then power them back on and retry the pairing process.
Can I use my AirPods for Peloton classes?
Yes! Once connected, the audio from your Peloton workout classes will play through your AirPod so you can hear the instructor and music.
Final Thoughts
Apple AirPods to a Peloton exercise bike or treadmill is a straightforward process that allows you to experience your workout classes in an immersive, wire-free way. You can quickly sync the two devices by following the easy steps to put your AirPod in pairing mode, enable Bluetooth on the Peloton screen, and select your AirPod from the list of available devices.
Once paired, the audio will stream directly to your AirPods so you can hear your instructor’s motivating coaching and energizing music without distracting cords. With this simple connection, you can entirely focus on crushing your fitness goals while enjoying the freedom and quality sound of your AirPods during every sweaty Peloton session.
With over 10 years of experience working in the fashion industry, I bring a unique expertise to my role. I am looking forward to sharing my knowledge and insights on the latest trends with my readers.
